Home

Products

HydroTracer

contact

Downloads

Imprint

German

 

NEW:

HYDROTRACER with optional wireless Bluetooth-interface

 

The HydroTracer can be equipped with an optional Bluetooth-interface.

This feature enables the wireless connection to a pc ore notebook and can substitute the RS232 interface, which might not be available anymore.

The Hydrotracer becomes a stand-alone-device in combination with a PDA (PocketPC) and the new PDA-software.

The main advantage is the enhanced mobility of this solution. The whole equipment fits in a pilot case with a total weight of less than 5 kg.

E. g. the inspection of incoming goods or the performance of acceptance trials becomes easier at any location.

The software is available in ENglish or German, for other languagues please enquire.

The operation of the software on the PDA is similar to that of the standard pc-program.

The inputs are performed by two multiple-choice-menus, thus reducing the text input.

 
 
 
 
  

Operation of the HYDROTRACER-software on a Pocket-PC

The HydroTracer is controlled by the software. The data is exchanged via a virtual serial interface RS 232 by the wireless Bluetooth system. The user is led through the sequence of manual test preparations by a text-supported menu, thus avoiding handling errors.The measurement is easily done in a few steps only. Each test consumes about 2 minutes of working time.

The following pictures are showing examples of the menus.

 

 

 

 

After start-up, the menu of the material selection appears. The name of the operator is choosen (optional new entry) The sample weight is put in.

 

 

 

 

 

 

A text-based menu shows the test procedure step by step. (the picture are showing examples)

 

The further operatation is done automatically. After approximately 10 minutes a prognosis of the proposed result is shown. The test continues until the result is established.

 

 

 

 

 

 

The software stops the test then. The test data is displayed as shown above..

The results is saved in a text-file.

The test protocol can be displayed and printed on a PC.

 

 

 
 
TECHNICAL DATA
 

Bluetooth-Interface:
Bluetooth Version 1.1
Class 2 (max. 20 m)

Minimum requirements Pocket-PC:
Operating system: WINDOWS Mobile 3.0
Processor: 300 MHz
Memory: 64 MB
Bluetooth-interface
Display: 240 x 320 pixel

Minimum requirements of the PC:

trouble-free operation of standard software FMX 3.01
Bluetooth-interface or Bluetooth-adapter, configured as serial interface